Best Iron For Quilting – We Review Our 4 Favorite Quilting Irons

2018-09-24 0 By Johnni Gregory

review

Seamstresses and quilters are constantly on the lookout for the perfect iron that will not leak and provide exceptional steam power. Over the years, we’ve gone through quite a few irons; some great, some terrible. We were (literally) burned once or twice, something all quilters can identify with.

So, how do you like the best iron for quilting? We’ll share our four favorite picks, but before we do that, let’s discuss a few basics of iron quotes. Sometimes it’s not the iron itself, but the technique you use is causing you trouble.

Quilting 101: The Basics of Pressing

Many quilters spend so much time sewing quilting and completely overlook the importance of pressing (I am also guilty). Most expert quilts recommend creating a press plan so you can avoid problems later in the project.

Should you steam?

One of the first questions Quilter asks is whether they should steam. There is really no right or wrong answer – it’s all about personal preference and commitment.

If you do not want to use steam, you may need a starch alternative to make sure your fabric is pressed properly. If you go with steam, you only need to top up your iron whenever necessary. Of course you also need to clean it to make sure that rust and mineral deposits are not a problem.

But ultimately, whether you steam or not is entirely up to you.

Press before you cut

Always press before you cut – no matter if you are using the fabric that has been cut from the bolt, or leftovers from your supply. The fabric on the screw can be bent at the fold or in some areas twisted or pulled. And if you want to wash before cutting, you will need to iron almost any fabric that comes out of your dryer.

Some quilters skip this step because the fabric does not look like it should be pressed. But a small crease or crease can make a real difference in your cutting accuracy, which will cause problems if you sew the pieces together.

Be gentle when pressing seams

It is easy to assume that you have to press hard to get these wrinkles out, but being too aggressive with the iron is a big no-no. Remember, you press seams – you do not iron a shirt. Go back to our homepage to learn more about sewing machines.

Press with your iron tip at a 90 degree angle along the seam and then parallel to the seam.

More tips:

  • Set the stitches by first pressing the seams flat.
  • Press the dark side to prevent dark colors from overshadowing the bright colors.

Our review of the 4 best steam irons for sewing or quilting:

Now that you have the technology down, you need a good iron. Which one do you choose? Here are our four favorite appetizers:

1. Oliso TG1600 Pro Smart Iron

You’ve probably already seen quilters rave about Oliso Iron despite their high price tags. And that’s because they offer a range of features that make stuffing a breeze.

The TG1600 Pro Smart Iron is our favorite steam iron from Oliso. It is sturdy and offers excellent steam performance and many handy features to keep your clothes and sewing materials safe.

A scratch-resistant outer surface ensures an optimal appearance of the iron, while the stainless steel sole resists rust and corrosion. I use mine for over a year every day and it still looks like I just got it out of the box.

The TG1600 has more vapor holes than other irons to create a strong, steady stream of vapor. I’d probably be shocked if I could add up the time I’ve saved without having to go over the same place over and over again as I did with my old steam iron.

Like the model TG1050 below, this iron features the iTouch Scorchguard technology to prevent it from tipping over, scorching or burning. It also floats over the fabric and makes the repeated lifting of the iron superfluous. With the touch of your hand, this iron can be lowered again. I found it super easy and easy to use.

Complaints about leaks and burns are virtually nonexistent with this iron, which is why so many quilters swear by it. I never had a leak over time that I used it. That was one of the most frustrating things with my previous cheap iron that I do not have to worry about anymore.

With a powerful, even steam flow and convenient lifting equipment, this iron is worth every penny. I love this iron for so many reasons and would not hesitate to buy it again when I needed it. If you look at this iron, all I have to say is that the price tag is really worth it.

2. Oliso TG1050 Smart Iron

The TG1050 is an affordable model in the range of the brand and makes pushing a real pleasure (no, really).

ITouch technology prevents burns and burns. With just a touch of your hand, the scorchguards of the iron lift and lower after ironing off again.

You do not have to lift this iron anymore – it floats over the fabric. A simple touch of the hand lowers the iron and makes it ready for use.

iron

The 12.7 ounce tank is located on the side of the iron, so you can easily refill while working.

The 8’8 “cable provides plenty of room and the iron can be swiveled 360 degrees.

Perhaps the most important feature of this iron is its anti-drip system, which prevents leakage and spitting out during use.

The steam power is also hard to beat.

3. Rowenta DW5080 steam iron

Rowenta is one of the most popular brands for iron, especially for quilters. And the DW5080 is a great option. It’s affordable, easy to use and the steam is powerful.

The soleplate is made of stainless steel and has 400 holes for an even, even steam distribution. The stainless steel precision tip and 1700 watts of power make this iron hard to overcome.

An anti-drip system prevents leaks and the improved thermostat maintains a constant temperature. The 3-way auto-off feature provides additional protection against unwanted burns.

Two things we love about this iron: It has a large 10 ounce water tank and a self-cleaning feature. The self-cleaning function ensures that loose mineral deposits, which can come through the steam, are rinsed out.

If you’re looking for a budget-friendly iron with a large water tank and powerful power generation, this model is a smart option.

4. Rowenta DW6080 eco-intelligence

The steam iron DW6080 by Rowenta is environmentally friendly. With an amazing output of 1700 watts, this model was developed to consume 25% less energy than a standard iron. The big part is that this steam iron does not lose any power.

This model is packed with features that revolutionize the way you iron clothes and fabrics.

Rowenta DW6080 features

  • 1700-watt power
  • Dry, Eco and Boost settings
  • Scratch-resistant design
  • precision point
  • 400+ steam microholes
  • 3D sole
  • Anti-drip design
  • 3-way switch-off
  • Vertical steam operation

Rowenta DW6080 Eco-Intelligence Steam Iron Review

Rowenta is changing the way people iron their clothes. This model starts with a 100% efficiency design that consumes 25% less energy than a standard iron. High performance, the 3D sole of this model allows precise steam output.

The soleplate reduces the loss of steam, enabling lower energy consumption than competing models.

If you look at the soleplate, you will also find 400 micro holes that allow even steam distribution during ironing. These holes make it easy and easy to iron wrinkles in shirts, pants and fabric.

The device also provides you with three main settings for operation:

  • Dry: The perfect setting for surfaces
  • Eco: The setting for optimal steam production
  • boost: A high output setting for thick material

Boost is also a good setting for wrinkles that you can not iron out easily.

Collar, seams and buttons make it difficult to iron, but there is also a quick fix. Rowenta’s sole has a developed toe that can be placed in hard-to-reach areas to prevent wrinkles or to avoid buttons.

A convenient twist grip allows the function for the left or right hand. The vertical steam production allows the ironing of clothes even when hanging.

Safety is an integral part of the design of the DW6080. The device has a three-way shut-off system that shuts off the iron when:

  • Left vertical for 8 minutes
  • Left for 30 seconds
  • Left tilted for 30 seconds

The water tank holds 10 ounces of water and there is an anti-limescale system that removes impurities in the steam. These contaminants clog the steam holes and can reduce optimal steam production.

  • Environmentally friendly and energy efficient
  • 3 safety shutdown functions
  • Boost adjustment for difficult wrinkles
  • Does not contain 6 heating modes

A problem with the DW6080 is that only three heating modes are available. High heating settings can cause damage to certain fabrics, and the heating modes available on this unit are on the upper side. So, what does all this mean?

When ironing nylon or chiffon, you will not have the lower settings to iron these materials without risking damage.

The iron would not be cool enough for these fabrics, but they have no reason to iron it.

Rowenta’s DW6080 impresses at first glance and impresses even after months of use. The lack of advanced temperature settings is a minor problem, and with the high energy efficiency of this unit, it is a problem that is easily overlooked.

If you need a new steam iron, it does not get much better than the DW6080.